• 24+4G/48+4G stackable switch
• SMII or S3MII interface for 10/100M ports
• TBI/GMII/MII interface for Gigabit ports
• 32-bit CPU embedded
• Embedded 4Mb SSRAM memory
• Collision-like back-pressure flow controlfor half-duplex; IEEE 802.3x pause packet flow control for full-duplex
• Embedded 8K addresses
• Up to 256 IVL and SVL MAC table
• Hashing algorithm with two ways resolution
• 128 multicast groups
• Auto-learning
• Per port learning disable
• Security address forwarding
• Security address filtering
• Port intrusion detection / Port movement notification
• Static entry setup
• 128 classification rules
• 10Gbps (15Mpps) throughput
• Per rule metering and accounting
• WRED 3-level drop precedence
• Re-mark DSCP
• Explicit priority rule and default rule
• Accounting and billing
• MAC-based accounting
• IP subnets, IP addresses accounting
• TCP/UDP port based accounting
• 4 priority queues
• Port-based, Address based, TU-port based, and TOS/DSCP based priority
• 802.1p/1Q tagged priority
• Port lock priority
• Weighted Round-Robin (WRR) programmable scheduling
• Strict priority for delay sensitive frame
|
• 255/4094 VLANs (4094 VLANs if 4K MACs address w/o IP table)
• Protocol based VLAN
• VLAN untag set
• Private VLAN
• Stack-wide Link aggregation (up to 4 bundle groups)
• Broadcast suppression
• Per port input/output bandwidth control
• Stack-wide Port mirroring
• Port/MAC based access control (802.1X)
• Support PPPoE implementation
• Support ACL implementation
• Support jumbo packet forwarding
• Per VLAN spanning tree
• Protocol snooping
• Auto polling speed/duplex/flow-control through auto-negotiation
• Serial LED interface
• Management MII (MDIO) interface
• MIB-II, RMON4 statistics counter
• 10-bit stack interface support 1G~2.5Gbps bandwidth
• In-line or Ring stack topology
• Auto switch ID discovery
• Up to 32 stacking units
• In-band command for stacking switch management
• Standard support
• 801.3u, 802.3z, 802.3ab, 802.3x, 802.3ad
• 802.1D, 802.1p, 802.1Q
• 802.1X, 802.1s, 802.1w, 802.1v
• 125MHz frequency clock
• 0.18um process
• Power consumption 6.5 watts
• PBGA-520
|