Cable System 1 – Swage Eyes. Eyes machined from Grade 316 Stainless Steel. Exact eye to eye dimension must be specified.
Cable System 2 – Swage Forks. Fork and fork system allowing movement in one plane only. Exact pin to pin dimension must be specified.
Cable System 3 – Swage Toggles. Toggle and toggle system allows for movement in two planes. Exact pin to pin dimension must be specified.
2. CABLE SYSTEMS – ADJUSTABLE LENGTH
Cable System 4 – Threaded Swage Terminals. Simple adjustment is obtained by adjusting nuts. Threaded swage terminals can be threaded directly into suitably threaded anchorages.
Cable System 5 – Toggle/swage turnbuckle and swage toggle. Turnbuckles provide excellent adjustment from one end and are available in Type 1, Type 2 and Commodity Grade styles. Swage toggles have the same toggle ends as turnbuckles for uniformity and aesthetics.
Cable System 6 – System as above with Type 2 turnbuckle in lieu of Type 1 turnbuckle. Note – Toggle shown in side elevation.
Cable System 7 – System as above with Type 3 turnbuckle in lieu of Type 1 turnbuckle and forks in lieu of toggles.
Note - System only available as a completed cable assembly. 3. ROD SYSTEMS – ADJUSTABLE LENGTH
Rod System 1 – Threaded rod with spanner flats and threaded fork ends. Tension is achieved by using the spanner flats to rotate the bar.
Supplied with aesthetic conical lock nuts and double headed pins. Available in bar sizes 3/16 in. (4.8mm) to 1 1/4 in. (31.8mm).
Rod System 2 – Threaded rod with spanner flats and threaded eye ends. Tension is achieved by using the spanner flats to rotate the bar.
Supplied with aesthetical conical lock nuts and threaded eye ends. Available in sizes 3/16 in. (4.8mm) to 1 1/4 in. (31.8mm).
Rod System 3 – Threaded rod with central joiner; required for rod lengths in excess of 6m (18ft). Note – can be supplied with
turnbuckle body for additional adjustment. Available in sizes 3/16 in. (4.8mm) to 1 1/4 in. (31.8mm). 4. BALUSTRADE SYSTEM EXAMPLES
Balustrade System 1 – Swage terminals tensioned with threaded terminal adjusters.
Balustrade System 2 – Microloc Turnbuckle body/Microloc swage terminal and Microloc swage fork with saddle connections.
Balustrade System 3 – Microloc Tamper-Resistant thread-mount turnbuckles with thread connection to posts.
Balustrade System 4 – Microloc Tamper-Resistant clevis pin-mount turnbuckles with anchor bolt connections.
Balustrade System 5 – Type 1 toggle/swage turnbuckle and swage/toggle with welded lug connections.
Balustrade System 6 – Threaded swage terminals, tensioned by external nuts.
Balustrade System 7 – Type 1 toggle/swage turnbuckle each end for extra tension on longer runs, with anchor bolt connections.
Balustrade System 8 – Microloc fork/fork turnbuckle and thimble/ferrule eyes with saddle connections.
